Home > POWERCARVING TOOLS > FOREDOM TYPHOON BURS
Sort By:
Page of 1
FOREDOM 1/8 SHAFT TYPHOON CARBIDE  CYLINDER BUR 5/16 X 1/2COARSE FOREDOM 1/8 SHAFT TYPHOON CARBIDE  BULLNOSE BUR 5/16 X 7/8 COARSE FOREDOM 1/8 SHAFT TYPHOON CARBIDE TAPER BUR 5/16 X 1/2 FINE
FOREDOM 1/8 SHAFT TYPHOON CARBIDE CYLINDER BUR 5/16 X 1/2COARSE
List Price: $17.60
Our Price: $15.85
Savings: $1.75
FOREDOM 1/8 SHAFT TYPHOON CARBIDE BULLNOSE BUR 5/16 X 7/8 COARSE
List Price: $17.90
Our Price: $15.85
Savings: $2.05
FOREDOM 1/8 SHAFT TYPHOON CARBIDE TAPER BUR 5/16 X 1/2 FINE
List Price: $17.90
Our Price: $15.85
Savings: $2.05
5/16 INCH CYLINDER SHAPE, 1/8 INCH SHAFT, COARSE GRIT
Typhoons have unique structurally aligned points that are ideal for rapid and aggressive shaping and roughing out work on hard and soft wood, acrylic, die stone, plaster, hard rubber and fiberglass. Typhoon burs last longer and do not load as quickly. Coarse (red) grit are more aggressive than fine (blue) grit, but both will remove a lot of material quickly.
25,000 RPM Max Speed. Made in USA.
Clean with HB58 Brass Brush. Do not use a file card or steel brush to clean Typhoon burs and sleeves.
5/16 INCH BULLNOSE SHAPE, 1/8 INCH SHAFT, COARSE GRIT
Typhoons have unique structurally aligned points that are ideal for rapid and aggressive shaping and roughing out work on hard and soft wood, acrylic, die stone, plaster, hard rubber and fiberglass. Typhoon burs last longer and do not load as quickly. Coarse (red) grit are more aggressive than fine (blue) grit, but both will remove a lot of material quickly.
25,000 RPM Max Speed. Made in USA.
Clean with HB58 Brass Brush. Do not use a file card or steel brush to clean Typhoon burs and sleeves.
5/16 INCH TAPER SHAPE, 1/8 INCH SHAFT, FINE GRIT
Typhoons have unique structurally aligned points that are ideal for rapid and aggressive shaping and roughing out work on hard and soft wood, acrylic, die stone, plaster, hard rubber and fiberglass. Typhoon burs last longer and do not load as quickly. Coarse (red) grit are more aggressive than fine (blue) grit, but both will remove a lot of material quickly.
25,000 RPM Max Speed. Made in USA.
Clean with HB58 Brass Brush. Do not use a file card or steel brush to clean Typhoon burs and sleeves.
FOREDOM 1/8 SHAFT TYPHOON CARBIDE  BULLNOSE BUR 5/16 X 7/8 FINE FOREDOM 1/8 SHAFT TYPHOON CARBIDE  TAPER BUR 7/16 X 5/8 COARSE FOREDOM 1/8 SHAFT TYPHOON CARBIDE FLAME BUR 7/16 X 5/8 FINE
FOREDOM 1/8 SHAFT TYPHOON CARBIDE BULLNOSE BUR 5/16 X 7/8 FINE
List Price: $17.90
Our Price: $15.85
Savings: $2.05
FOREDOM 1/8 SHAFT TYPHOON CARBIDE TAPER BUR 7/16 X 5/8 COARSE
List Price: $17.90
Our Price: $15.85
Savings: $2.05
FOREDOM 1/8 SHAFT TYPHOON CARBIDE FLAME BUR 7/16 X 5/8 FINE
List Price: $17.90
Our Price: $15.85
Savings: $2.05
5/16 INCH BULLNOSE SHAPE, 1/8 INCH SHAFT, FINE GRIT
Typhoons have unique structurally aligned points that are ideal for rapid and aggressive shaping and roughing out work on hard and soft wood, acrylic, die stone, plaster, hard rubber and fiberglass. Typhoon burs last longer and do not load as quickly. Coarse (red) grit are more aggressive than fine (blue) grit, but both will remove a lot of material quickly.
25,000 RPM Max Speed. Made in USA.
Clean with HB58 Brass Brush. Do not use a file card or steel brush to clean Typhoon burs and sleeves.
5/16 INCH TAPER SHAPE, 1/8 INCH SHAFT, COARSE GRIT
Typhoons have unique structurally aligned points that are ideal for rapid and aggressive shaping and roughing out work on hard and soft wood, acrylic, die stone, plaster, hard rubber and fiberglass. Typhoon burs last longer and do not load as quickly. Coarse (red) grit are more aggressive than fine (blue) grit, but both will remove a lot of material quickly.
25,000 RPM Max Speed. Made in USA.
Clean with HB58 Brass Brush. Do not use a file card or steel brush to clean Typhoon burs and sleeves.
5/16 INCH FLAME SHAPE, 1/8 INCH SHAFT, FINE GRIT
Typhoons have unique structurally aligned points that are ideal for rapid and aggressive shaping and roughing out work on hard and soft wood, acrylic, die stone, plaster, hard rubber and fiberglass. Typhoon burs last longer and do not load as quickly. Coarse (red) grit are more aggressive than fine (blue) grit, but both will remove a lot of material quickly.
25,000 RPM Max Speed. Made in USA.
Clean with HB58 Brass Brush. Do not use a file card or steel brush to clean Typhoon burs and sleeves.
FOREDOM TYPHOON CARBIDE  BUR 3/8 X 3/4 FLAME COARSE FOREDOM 1/8 SHAFT TYPHOON CARBIDE  LONG TAPER BUR 3/16 X 3/4 FINE FOREDOM 1/8 SHAFT TYPHOON CARBIDE  BULLNOSE BUR 3/16 X 7/8 COARSE
FOREDOM TYPHOON CARBIDE BUR 3/8 X 3/4 FLAME COARSE
List Price: $19.95
Our Price: $17.00
Savings: $2.95
FOREDOM 1/8 SHAFT TYPHOON CARBIDE LONG TAPER BUR 3/16 X 3/4 FINE
List Price: $19.90
Our Price: $17.90
Savings: $2.00
FOREDOM 1/8 SHAFT TYPHOON CARBIDE BULLNOSE BUR 3/16 X 7/8 COARSE
List Price: $19.90
Our Price: $17.95
Savings: $1.95
1/4 INCH FLAME SHAPE, 1/4 INCH SHAFT, COARSE GRIT
Typhoons have unique structurally aligned points that are ideal for rapid and aggressive shaping and roughing out work on hard and soft wood, acrylic, die stone, plaster, hard rubber and fiberglass. Typhoon burs last longer and do not load as quickly. Coarse (red) grit are more aggressive than fine (blue) grit, but both will remove a lot of material quickly.
25,000 RPM Max Speed. Made in USA.
Clean with HB58 Brass Brush. Do not use a file card or steel brush to clean Typhoon burs and sleeves.
3/16 INCH TAPER SHAPE, 1/8 INCH SHAFT, FINE GRIT
Typhoons have unique structurally aligned points that are ideal for rapid and aggressive shaping and roughing out work on hard and soft wood, acrylic, die stone, plaster, hard rubber and fiberglass. Typhoon burs last longer and do not load as quickly. Coarse (red) grit are more aggressive than fine (blue) grit, but both will remove a lot of material quickly.
25,000 RPM Max Speed. Made in USA.
Clean with HB58 Brass Brush. Do not use a file card or steel brush to clean Typhoon burs and sleeves.
3/16 INCH BULLNOSE SHAPE, 1/8 INCH SHAFT, COARSE GRIT
Typhoons have unique structurally aligned points that are ideal for rapid and aggressive shaping and roughing out work on hard and soft wood, acrylic, die stone, plaster, hard rubber and fiberglass. Typhoon burs last longer and do not load as quickly. Coarse (red) grit are more aggressive than fine (blue) grit, but both will remove a lot of material quickly.
25,000 RPM Max Speed. Made in USA.
Clean with HB58 Brass Brush. Do not use a file card or steel brush to clean Typhoon burs and sleeves.
FOREDOM 1/4 SHAFT TYPHOON CARBIDE SPHERE BUR 9/16 COARSE FOREDOM 1/4 SHAFT TYPHOON CARBIDE SPHERE BUR 9/16 FINE FOREDOM 1/4 SHAFT TYPHOON CARBIDE BULLNOSE BUR 9/16 BY 3/4 FINE
FOREDOM 1/4 SHAFT TYPHOON CARBIDE SPHERE BUR 9/16 COARSE
List Price: $20.40
Our Price: $18.35
Savings: $2.05
FOREDOM 1/4 SHAFT TYPHOON CARBIDE SPHERE BUR 9/16 FINE
List Price: $20.40
Our Price: $18.35
Savings: $2.05
FOREDOM 1/4 SHAFT TYPHOON CARBIDE BULLNOSE BUR 9/16 BY 3/4 FINE
List Price: $20.40
Our Price: $18.35
Savings: $2.05
9/16 INCH SPHERE HEAD SHAPE, 1/4 INCH SHAFT, COARSE GRIT
Typhoons have unique structurally aligned points that are ideal for rapid and aggressive shaping and roughing out work on hard and soft wood, acrylic, die stone, plaster, hard rubber and fiberglass. Typhoon burs last longer and do not load as quickly. Coarse (red) grit are more aggressive than fine (blue) grit, but both will remove a lot of material quickly.
25,000 RPM Max Speed. Made in USA.
Clean with HB58 Brass Brush. Do not use a file card or steel brush to clean Typhoon burs and sleeves.
9/16 INCH SPHERE HEAD SHAPE, 1/4 INCH SHAFT, FINE GRIT
Typhoons have unique structurally aligned points that are ideal for rapid and aggressive shaping and roughing out work on hard and soft wood, acrylic, die stone, plaster, hard rubber and fiberglass. Typhoon burs last longer and do not load as quickly. Coarse (red) grit are more aggressive than fine (blue) grit, but both will remove a lot of material quickly.
25,000 RPM Max Speed. Made in USA.
Clean with HB58 Brass Brush. Do not use a file card or steel brush to clean Typhoon burs and sleeves.
9/16 INCH BULLNOSE HEAD SHAPE, 1/4 INCH SHAFT, FINE GRIT
Typhoons have unique structurally aligned points that are ideal for rapid and aggressive shaping and roughing out work on hard and soft wood, acrylic, die stone, plaster, hard rubber and fiberglass. Typhoon burs last longer and do not load as quickly. Coarse (red) grit are more aggressive than fine (blue) grit, but both will remove a lot of material quickly.
25,000 RPM Max Speed. Made in USA.
Clean with HB58 Brass Brush. Do not use a file card or steel brush to clean Typhoon burs and sleeves.
FOREDOM 1/4 SHAFT TYPHOON CARBIDE BULLNOSE BUR 9/16 BY 3/4 COARSE FOREDOM 1/4 SHAFT TYPHOON CARBIDE LONG TAPER BUR 5/16 x 1-1/2 COARSE FOREDOM 1/4 SHAFT TYPHOON CARBIDE  TAPER BUR9/16 x 1 COARSE
FOREDOM 1/4 SHAFT TYPHOON CARBIDE BULLNOSE BUR 9/16 BY 3/4 COARSE
List Price: $20.40
Our Price: $18.35
Savings: $2.05
FOREDOM 1/4 SHAFT TYPHOON CARBIDE LONG TAPER BUR 5/16 x 1-1/2 COARSE
List Price: $20.50
Our Price: $18.45
Savings: $2.05
FOREDOM 1/4 SHAFT TYPHOON CARBIDE TAPER BUR9/16 x 1 COARSE
List Price: $20.50
Our Price: $18.45
Savings: $2.05
9/16 INCH BULLNOSE HEAD SHAPE, 1/4 INCH SHAFT, COARSE GRIT
Typhoons have unique structurally aligned points that are ideal for rapid and aggressive shaping and roughing out work on hard and soft wood, acrylic, die stone, plaster, hard rubber and fiberglass. Typhoon burs last longer and do not load as quickly. Coarse (red) grit are more aggressive than fine (blue) grit, but both will remove a lot of material quickly.
25,000 RPM Max Speed. Made in USA.
Clean with HB58 Brass Brush. Do not use a file card or steel brush to clean Typhoon burs and sleeves.
5/16 INCH TAPER SHAPE, 1/4 INCH SHAFT, COARSE GRIT
Typhoons have unique structurally aligned points that are ideal for rapid and aggressive shaping and roughing out work on hard and soft wood, acrylic, die stone, plaster, hard rubber and fiberglass. Typhoon burs last longer and do not load as quickly. Coarse (red) grit are more aggressive than fine (blue) grit, but both will remove a lot of material quickly.
25,000 RPM Max Speed. Made in USA.
Clean with HB58 Brass Brush. Do not use a file card or steel brush to clean Typhoon burs and sleeves.
9/16 INCH TAPER SHAPE, 1/4 INCH SHAFT, COARSE GRIT
Typhoons have unique structurally aligned points that are ideal for rapid and aggressive shaping and roughing out work on hard and soft wood, acrylic, die stone, plaster, hard rubber and fiberglass. Typhoon burs last longer and do not load as quickly. Coarse (red) grit are more aggressive than fine (blue) grit, but both will remove a lot of material quickly.
25,000 RPM Max Speed. Made in USA.
Clean with HB58 Brass Brush. Do not use a file card or steel brush to clean Typhoon burs and sleeves.
FOREDOM 1/4 SHAFT TYPHOON CARBIDE  BUR 5/8 X 1-1/16 FLAME COARSE FOREDOM 3/32 SHAFT TYPHOON CARBIDE  LONG TAPER BUR 3/16 X 3/4 FINE FOREDOM 3/32 SHAFT TYPHOON CARBIDE SPHERE BUR 3/16 FINE
FOREDOM 1/4 SHAFT TYPHOON CARBIDE BUR 5/8 X 1-1/16 FLAME COARSE
List Price: $22.00
Our Price: $18.50
Savings: $3.50
5/8 INCH FLAME SHAPE, 1/4 INCH SHAFT, COARSE GRIT
Typhoons have unique structurally aligned points that are ideal for rapid and aggressive shaping and roughing out work on hard and soft wood, acrylic, die stone, plaster, hard rubber and fiberglass. Typhoon burs last longer and do not load as quickly. Coarse (red) grit are more aggressive than fine (blue) grit, but both will remove a lot of material quickly.
25,000 RPM Max Speed. Made in USA.
Clean with HB58 Brass Brush. Do not use a file card or steel brush to clean Typhoon burs and sleeves.
3/16 INCH LONG TAPER SHAPE, 3/32 INCH SHAFT, FINE GRIT
Typhoons have unique structurally aligned points that are ideal for rapid and aggressive shaping and roughing out work on hard and soft wood, acrylic, die stone, plaster, hard rubber and fiberglass. Typhoon burs last longer and do not load as quickly. Coarse (red) grit are more aggressive than fine (blue) grit, but both will remove a lot of material quickly.
25,000 RPM Max Speed. Made in USA.
Clean with HB58 Brass Brush. Do not use a file card or steel brush to clean Typhoon burs and sleeves.
3/16 INCH SHAPE, 3/32SPHERE INCH SHAFT, FINE GRIT
Typhoons have unique structurally aligned points that are ideal for rapid and aggressive shaping and roughing out work on hard and soft wood, acrylic, die stone, plaster, hard rubber and fiberglass. Typhoon burs last longer and do not load as quickly. Coarse (red) grit are more aggressive than fine (blue) grit, but both will remove a lot of material quickly.
25,000 RPM Max Speed. Made in USA.
Clean with HB58 Brass Brush. Do not use a file card or steel brush to clean Typhoon burs and sleeves.
FOREDOM 3/32 SHAFT TYPHOON CARBIDE BUD SHAPE BUR 5/16 FINE FOREDOM 1/4 SHAFT TYPHOON CARBIDE BULLNOSE BUR 13/16 BY 1-1/4 FINE
FOREDOM 1/4 SHAFT TYPHOON CARBIDE BULLNOSE BUR 13/16 BY 1-1/4 FINE
List Price: $28.00
Our Price: $25.20
Savings: $2.80
5/16 INCH SHAPE, 3/32 INCH SHAFT BUD SHAPE, FINE GRIT
Typhoons have unique structurally aligned points that are ideal for rapid and aggressive shaping and roughing out work on hard and soft wood, acrylic, die stone, plaster, hard rubber and fiberglass. Typhoon burs last longer and do not load as quickly. Coarse (red) grit are more aggressive than fine (blue) grit, but both will remove a lot of material quickly.
25,000 RPM Max Speed. Made in USA.
Clean with HB58 Brass Brush. Do not use a file card or steel brush to clean Typhoon burs and sleeves.
13/16 INCH BULLNOSE HEAD SHAPE, 1/4 INCH SHAFT, FINE GRIT
Typhoons have unique structurally aligned points that are ideal for rapid and aggressive shaping and roughing out work on hard and soft wood, acrylic, die stone, plaster, hard rubber and fiberglass. Typhoon burs last longer and do not load as quickly. Coarse (red) grit are more aggressive than fine (blue) grit, but both will remove a lot of material quickly.
25,000 RPM Max Speed. Made in USA.
Clean with HB58 Brass Brush. Do not use a file card or steel brush to clean Typhoon burs and sleeves.